FS#67 - initramfs: problem with e2fsck
Attached to Project:
CRUX-ARM
Opened by Victor Martinez (pitillo) - Saturday, 30 November 2013, 16:15 GMT
Last edited by Victor Martinez (pitillo) - Saturday, 18 January 2014, 13:07 GMT
Opened by Victor Martinez (pitillo) - Saturday, 30 November 2013, 16:15 GMT
Last edited by Victor Martinez (pitillo) - Saturday, 18 January 2014, 13:07 GMT
|
DetailsCRUX-ARM 3.0 - http://crux-arm.nu/
* Mounting /proc, /sys. * Mounting filesystems... OK * Populating /dev via mdev... OK * Registering mdev as hotplug agent... OK * Creating and mounting /dev/pts... OK * Starting kernel log daemon... OK * Setting hostname... OK * Loading network loopback device... OK * Saving boot messages... OK * Trying to find and mount the media installer... * Searching for the CRUX media... * Found media on /dev/mmcblk0p1, CRUX media. The system is coming up. Please wait. Please press Enter to activate this console. # fsck fsck (busybox 1.21.1, 2013-11-01 23:47:28 UTC) # e2fsck /dev/sda1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/sda1 is mounted. e2fsck: e2fsck not compiled with HTREE support, but filesystem /dev/sda1 has HTREE directories. e2fsck: Get a newer version of e2fsck! /dev/sda1: ********** WARNING: Filesystem still has errors ********** Possible solution --enable-htree in e2fsprogs configure |
This task depends upon
http://crux-arm.nu/~pitillo/initramfs-htree.diff
# e2fsck /dev/mmcblk0p1
e2fsck 1.42.5 (29-Jul-2012)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk0p1 is mounted.
/dev/mmcblk0p1: clean, 11/200000 files, 30122/799998 blocks